Here are the step-by-step instructions to replace the handlebar on your Oscar Mx or M2 stroller.
You will need a drill, a pop rivet gun & a flat-head screwdriver.
When you purchase a replacement handlebar, it comes with the rivets needed.
1. Using a drill with a 5mm drill bit, remove the pop rivet on either side of the handle.
2. Remove the existing handle and discard. Make sure all remnants of the rivets are out of the handlebar joint.
3. Place new replacement handle in the handlebar joint. Using a flathead screwdriver, make sure the leather is tucked inside the handlebar joint.
4. Fix the handlebar with 2 x 4.8 x 14mm pop rivets.
If you need any further instructions or have any questions, please email firstname.lastname@example.org
Please sign in to leave a comment.